R62 JBM/FC blue
Applications
Trendy design elements can be used to customize wheels quickly and simply to produce an attractive, personalized look. Such applications vary widely in terms of design, and a variety of methods is also used to secure them to the wheel.
Whether bonded, clipped or affixed with one or more screws, or a combination of these techniques – the wheel and the design element selected need to be coordinated with each other. It is also necessary to consider aspects such as mold wear, distortion in the wheel or constant gap dimensions, in addition to the options for series production and fitting.
Precise geometries which cannot be achieved by LPDC are also possible here. Wheels can be ordered in a range of colors with or without applications, which can be fitted at a later date too.
Diamond Cut
To produce mirror finishes and two-tone wheels, we use a diamond cut process.
Here the aluminum wheels are pre-painted and the surface is then turned using a diamond cutting tool. By removing a small amount of paint and aluminum, a shiny metallic, finely-honed surface is revealed. Diamond cut is performed especially on the wheel flange or on the spokes. This is how two-tone wheels are made – a real eye-catcher!
Undercut
Material that is not essential for wheel stability can go – thereby saving weight.
This principle of removing material behind the spokes that is not relevant to strength goes by the name of undercut for wheel manufacturing at the RONAL GROUP. Undercuts are produced either by machining or flowforming and can reduce wheel weight by between 600 g and 1.4 kg depending on dimension and design.
Vibrant Sky
Optionally available for order as an accessory:
Application kit with installation instructions
Mean Green
Optionally available for order as an accessory:
Application kit with installation instructions
Red Heat
Optionally available for order as an accessory:
Application kit with installation instructions
RONAL and SPEELINE CORSE winter wheels are marked with the snowflake icon. These winter-ready, pre-treated and painted alloy wheels are always the right choice even in the cold and wet season. They not only defy the weather, but are also a visual highlight in the snow to boot.
We are the first manufacturer ever to provide all our aftermarket wheels with their own sustainability label. This provides information about the CO2 savings achieved during production of that wheel. We do this by performing precise traceability of the CO2 footprint, from product development through material procurement and manufacturing to recycling.
Don’t just opt for the perfect design, but also for more sustainability and with the same original equipment manufacturer quality. The following label will help you in your decision: