SL3 Cesare MB/FC

Matt black-front diamond cut
This wheel is captivating thanks to its masculine sporty appearance, and it meets the highest technical standards with excellent quality. These light metal wheels are visually arresting thanks to the clear, balanced cross spoke design, the distinctive wheel center and the high-quality matt black finish in combination with the polished design side. The SL3 Cesare is extremely suitable for vehicles of the upper mid-range and for SUVs.
This wheel is captivating thanks to its masculine sporty appearance, and it meets the highest technical standards with excellent quality. These light metal wheels are visually arresting thanks to the clear, balanced cross spoke design, the distinctive wheel center and the high-quality matt black finish in combination with the polished design side. The SL3 Cesare is extremely suitable for vehicles of the upper mid-range and for SUVs.
Variants
N/A
Sizes
8,0 x 19"
9,0 x 19"
9,0 x 21"
Technologies

Corse Design

Corse Design

Corse design in lightweight optics

Diamond Cut

Diamond cut RAINBOW EFFECTS FOR GLOSSY SURFACES

 

 

To produce mirror finishes and two-tone wheels, we use a diamond cut process.

Glanzdrehen

Here the aluminum wheels are pre-painted and the surface is then turned using a diamond cutting tool. By removing a small amount of paint and aluminum, a shiny metallic, finely-honed surface is revealed. Diamond cut is performed especially on the wheel flange or on the spokes. This is how two-tone wheels are made – a real eye-catcher!

PrPr

 

 

Flowforming

Flowforming FOR GREATER STRENGTH AND LOWER CONSUMPTION

 

Facing the challenge of making the aluminum wheel ever lighter, for years the RONAL GROUP has successfully made use of flowforming, a technology that is popular in the OEM sector.

Flowforming

Flowforming is a process in which the rim well of the cast blank is rolled out over a die. The result is greater strength with a thinner wall and higher load capacities. This production technique makes it possible to reduce volume in the rim well, sometimes by as much as 50%. This substantial weight saving cuts consumption levels and thus benefits the environment at the same time.
The company is also able to offer the wide variety of designs that is popular with customers, while maintaining its high safety standard. Flowforming can additionally be combined with other technologies such as Undercut and Reverse.

 

 

PrPr
Holes
Winter
Yes
Accessories
N/A