R9 S/LC

Silver-rim lip diamond cut
The RONAL R9 remake brings the tuning tradition for classic vehicles back to life. Suitable for the Mercedes W 123, VW Transporter T3, BMW 5/1 and 5/H, it lends every legend an unmistakable look. Shaping an entire generation of car fans, the retro wheel is available in a vintage silver-rim lip diamond cut.
R9 S_LC
R9 S_LC
R9 S_LC
The RONAL R9 remake brings the tuning tradition for classic vehicles back to life. Suitable for the Mercedes W 123, VW Transporter T3, BMW 5/1 and 5/H, it lends every legend an unmistakable look. Shaping an entire generation of car fans, the retro wheel is available in a vintage silver-rim lip diamond cut.
Variants
R9 RG_LC

R9 RG/LC

Sizes
7,0 x 15"
7,0 x 16"
Technologies

Diamond Cut

Diamond cut RAINBOW EFFECTS FOR GLOSSY SURFACES

 

 

To produce mirror finishes and two-tone wheels, we use a diamond cut process.

Glanzdrehen

Here the aluminum wheels are pre-painted and the surface is then turned using a diamond cutting tool. By removing a small amount of paint and aluminum, a shiny metallic, finely-honed surface is revealed. Diamond cut is performed especially on the wheel flange or on the spokes. This is how two-tone wheels are made – a real eye-catcher!

PrPr

 

 

Holes
Accessories
N/A
Attributes
Suitable for winter Info

RONAL and SPEELINE CORSE winter wheels are marked with the snowflake icon. These winter-ready, pre-treated and painted alloy wheels are always the right choice even in the cold and wet season. They not only defy the weather, but are also a visual highlight in the snow to boot.

RONAL SUSTAINABILITY LABEL

We are now the first manufacturer to transparently label all our rims with our own sustainability label, which gives you precise information about the CO2 footprint of each wheel during production.

co2_neutral_blatt

 

CO2 equivalents (CO2eq) are a unit of measurement for standardizing the climate impact of the various greenhouse gases. The calculations are based on the raw casting weight of the largest RONAL wheel currently in the range, as the average wheel-weights vary from plant to plant.

This is made possible by the precise traceability of our CO2 emissions, from product development, material procurement and production through to the recycling of old wheel. Because we not only want to create innovative wheel, but also sustainable ones.

As the RONAL GROUP, our goal is to reduce our CO2 emissions in production by 50% by 2030 and to become completely CO2-neutral by 2050.

Be part of this change and choose wheel that not only look after your vehicle, but also our planet! And with the same OEM quality. 

InfoMaterial
N/A